Plumbing Repair MN | Leaky Faucets, Fixture & Pipe Repair MN

Fix a Leak Week | Repair Dripping Faucets, Running Toilets, and Leaky Showerheads MN

March 12-18 marks Fix-a-Leak Week, and it’s a great time to make some repairs to keep your money from literally going down the drain.

To encourage people to investigate possible water leakage in their homes, Fix a Leak Week, sponsored by the Environmental Protection Agency (EPA), the national awareness campaign takes place from March 12th to 18th, and is designed to be a designated time to check household plumbing fixtures and irrigation systems for leaks.

The average home can waste more than 10,000 gallons of water each year due to running toilets, dripping faucets and other household leaks. The results: wasted water and pricier water bills.

According to the U.S. EPA, household leaks from toilets, faucets and showerheads waste 1 trillion gallons of water each year nationwide. This drives up utility operating costs and places unnecessary strain on water and wastewater infrastructure.

Find and Fix Leaks In Your Home!

Many people do not realize is that a major, unnecessary expense is lurking right under their roofs. Water leaks! Water leaks caused by dripping faucets, running toilets, and leaky showerheads – waste thousands of gallons of water. Also, when left unaddressed, these problems can literally result in hundreds of dollars washed down the drain.

Common types of leaks found in the home are worn toilet flappers, leaky toilets, dripping faucets, and leaking showerheads; all of which are easily correctable. In most cases fixture replacement parts don’t require a large investment while fixing these easy household water leaks can save homeowners more than 10 percent on their water bills.

How Much Water Can a Little Drip Waste?

The constant drip of a leaky shower head is a bit like a nagging conscience, telling you something is wrong. Consider this — a showerhead leaking at 10 drips per minute wastes more than 500 gallons per year. That’s enough water to wash 60 loads of dishes in your dishwasher.  Now, that might not seem like a lot to us, but it can add up in the long run. If you left that shower head dripping for an entire year, you would lose more than 1,000 gallons of water.

A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. U.S. Geological Survey. But how much would that water cost you? How much water does a leaking faucet waste?

According to the American Water Works Association, The national average cost of water is $2.00 per 1,000 gallons. Letting a year’s worth of water drip through the drain is costing you money.

The average American family spends about $474 each year on water and sewage charges. You also have to think about where the water goes once it drips out and away from your home. Clean water that slips down the drain is treated as sewage by your water company. That means more work for the treatment plant, more energy used, and more disinfectants added (especially chlorine, which raises environmental concerns). That cheap water soon gets expensive.

And finally, chances are you aren’t the only one in your region with a leaky shower head. Multiply 2 gallons per day by a few thousand homes and you can imagine the strain on the ecosystem.

By replacing appliances such as the dishwasher and inefficient fixtures such as toilets and showerheads, you can save a substantial amount each year in water, sewage, and energy costs.

You can’t single-handedly solve these water worries, but you don’t have to be part of the problem. Fixing a leaky shower head is fairly easy and inexpensive. Repairs quickly pay for themselves in money saved. Replace any older shower heads, especially those installed before the 1990s, whether or not they’re leaky. Newer models save you up to 3 gallons (11.4 liters) of water per minute. Low-flow shower heads can save even more.

Finding and fixing leaking toilets is another great way to conserve our valuable water resources. If your toilet is running constantly, you could be wasting 200 gallons of water or more every day. If your toilet is leaking, the cause is most often an old, faulty toilet flapper. Over time, this inexpensive rubber part decays, or minerals build up on it. It’s usually best to replace the whole rubber flapper—a relatively easy, inexpensive do-it-yourself project that pays for itself in no time.

To find out if you have a toilet leak, simply place a drop of food coloring in the toilet tank. If the color shows up in the bowl within 15 minutes without flushing, you have a leak. Make sure to flush immediately after completing this experiment to avoid staining the tank.

Another way that fixing leaks can potentially save you money is in that you will not have repair expenses if your home floods and you need to make repairs to damaged walls, ceilings, and floors. One way to detect a leak is by checking your water meter before and after a two hour period when no water is being used. If the meter does not read exactly the same before and after, you probably have a leak.

There are other ways to conserve water, too. If you’re building a new home or remodeling your kitchen or bathroom, you’ll save by installing tankless water heaters, low-flow plumbing fixtures, dual-flush toilets.

Think you have a leak, but can’t determine where? Call a Minnesota plumbing contractor to help you locate and rid your home of these wasteful problems.

Leave a Reply